Efficient control unit, for 4 drives 2mag bioMIXdrive 1, developed for the hard daily lab use and uncompromising warming-free continuous operation.
Control unit for the connection of 4 stirring drive bioMIXdrive 1, individual and independent speed setting for each stirring drive (Master-Slave-Technology), also ON-/OFF function, synchronous speed mode for all drives, extended speed range from 5 to 250 rpm, 6 watts/stirring position without any own-generated heating effect, automatic power setting for the warming-free continuous operation e.g. in CO2-incubators, jerk-free stirring, even and smooth stirring also at slow speeds.
Digital display for speed setting, SoftStart for reliable and safe accelerating of stirring bar, QuickSet for quick setting of start and maximum speed, storage of last working status when turning off, firm stainless steel housing, easy to clean.
| Type | bioMIXcontrol 4MS |
| Speed range | 5 – 250 rpm (4x individual setting) |
| Connection sockets | 4 (for bioMIXdrive 1 only) |
| Stirring power (max.) | 6 watts / bioMIXdrive 1 (automatic) |
| Power setting | - |
| Housing material | Stainless steel |
| Permitted operation conditions | 0 °C bis +40 °C (at 80% humidity) |
| Electrical data | 100-240 V / 50-60 Hz / 1.5 A |
| Dimensions (WxDxH) | 200 x 155 x 38 mm |
| Protection category | IP20 |
| Weight (gross) | approx. 2.0 kg |
| Order no. | 98604 |
| Type | bioMIXcontrol | bioMIXcontrol S | bioMIXcontrol 4MS |
| Speed range | 5 - 250 rpm | ||
| Power setting | 10 - 100% (10-step) | 6 W per stirring point (only for bioMIXdrive 1) | |
| Material Housing | Stainless steel | ||
| Permitted operation conditions | 0 °C up to +40 °C (at 80% humidity) | ||
| Electrical data | 100-240 V / 50-60 Hz / 1.5 A | ||
| Dimensions (WxDxH) | 200 x 155 x 38 mm | 215 x 120 x 57 mm | 200 x 155 x 38 mm |
| Protection category | IP20 | ||
| Weight (gross) | approx. 1.9 kg | approx. 2.0 kg | |
| Order no. | 98400 | 98500 | 98604 |
Suitable accessories
 |
Extension cord for bioMIXdrive Extension cord for bioMIXdrive, length 3m |
| 2mag STIRRING DRYBATH 15-250 |
| Technisch identisch wieSTIRRING DRYBATH 15-100, jedoch mit 15 Bohrungen, ø 71,5 mm, Tiefe 78 mm, Abstand 84 mm, optimiert für 250 ml Laborflaschen und für 400 ml Bechergläser |
| 2mag STIRRING DRYBATH 15-250 |
| Technisch identisch wieSTIRRING DRYBATH 15-100, jedoch mit 15 Bohrungen, ø 71,5 mm, Tiefe 78 mm, Abstand 84 mm, optimiert für 250 ml Laborflaschen und für 400 ml Bechergläser |